Why AFS Cartridges: Patented, Pre-Packed CRC Filtration
Color remediation works. Hand-packing a column to do it is the slow, messy part. AFS cartridges take the packing out of your process: each one arrives pre-packed with a filter blend, drops into a stainless housing, and gets thrown away when the run is done. This post covers how they're built, what they change in your lab, and how to pick the right blend and size.
The Problem With Hand-Packed Columns
Loose clays, silicas and carbons have been the standard way to run CRC for years. They do the job, but they bring the same problems to every run:
- Dust. Scooping and weighing fine powders puts media in the air and on every surface in the room.
- Channeling. No two hand-packed columns are packed exactly the same. Loose or uneven spots give solvent an easy path around the media, so some of your extract barely gets filtered.
- Media in your oil. A gasket that isn't seated right or a torn screen lets fine media slip downstream into your product and your equipment.
- Downtime. Every run ends with emptying, scrubbing and repacking the column before the next one can start.
How AFS Cartridges Are Built
The AFS cartridge is a patented design (U.S. Patent No. 11,173,437). Each one is a semi-rigid filter cup that:
- comes pre-packed and sealed with filter media, so there's nothing to scoop or weigh;
- has a built-in flange with O-rings molded into the top and bottom, so it seals itself when clamped into the housing;
- has a gridded floor with a 2.5 µm paper filter molded into the base, so the media stays in the cup and out of your oil;
- sits inside a stainless steel spool with tri-clamp flanges on both ends, so it connects to your existing system.
When a run is done, you unclamp the housing, lift out the spent cup, drop in a fresh one and clamp it back up. The media never leaves the cup, so there's nothing to clean out of the housing.
What Changes In Your Lab
- No loose media to handle. The media is sealed in the cup from start to finish, so the dust stays out of the air.
- The same packing every run. Every cartridge is packed the same way, so results don't depend on who packed the column that day.
- Nothing leaks through. The paper filter in the base keeps media out of your extract and your pumps.
- Fast changeovers. Swapping a cartridge takes a fraction of the time it takes to empty, clean and repack a column, so you can run more material per shift.
Pick Your Blend
Different starting material needs different media. AFS cartridges come in blends matched to the job:
- Light, Medium and Heavy for light polishing through heavy color correction.
- Economy for budget-friendly everyday runs.
- Fresh Frozen for live material, and Dry Biomass for cured material.
- Pure, Outdoor and Reform for specific starting material.
- P+ Pesticide for pesticide remediation.
Not sure where to start? Our CRC filter media guide walks through what each type of media does.
Sizes And Connections
Cartridges come in 2.5", 4" and 6" diameters. Housings are available to connect inside AFS-compatible systems or inline, with 1.5" or 2" tri-clamp, 1/4" NPT, or 3/8" dip tube connections.
Try Them In Your Process
The easiest way to see the difference is to run them. Start with a starter pack, or ask about our free sample kit. Questions about which blend or size fits your setup? Contact us and we'll help you pick.
Shop AFS CRC Filters
Pre-packed cartridges in every size, ready to drop into your column.
2.5" Filters 4" Filters 6" Filters Starter Packs
Post a Comment!